||||||||| ||||||||| |||||||||

AquaStar

Technical details

High-pressure water system

  • Jetting pump: KAISER pressure transformer KDU 148
  • Flow rate 320 – 400 L/min, max. 200 bar
  • Jetting reel capacity 220 m 1” or 150 m 5/4” HP hose
  • Manual reel
  • ROTOMAX water recycling system

Vacuum system

  • Vacuum pump: KAISER liquid ring pump KWP
  • Suction capacity 1600 – 3100 m3/h
  • Telescopic suction boom or combined suction/jetting boom

Tank structure

  • Sludge tank and fresh water tank in chrome steel
  • Tank capacity 10,300 litres (26to) to 12,800 litres (32to)
  • Vacuum pump fitted inside fresh water tank
  • Tank cover with lock ring
  • Tipping system

Operation

  • Control panel on right-hand side at rear of vehicle
  • Radio remote control
  • KAISERtronic control system
  • KAISERteleservice remote maintenance system
Download

Efficient performance

The KAISER AquaStar offers a perfect combination of performance and versatility. The KDU high-pressure pump delivers water at a rate of 320 to 500 litres per minute (with a double KDU up to 800 litres) and water pressure of up to 200 bar. The large-size hose reel can accommodate a 300 m setting hose.

On the KAISER vacuum pump the maximum air throughput is 3100 m3/h (with a double KWP up to 6200 m3/h). Due to the selection of various suction booms , the vehicle can be optimally adapted to the respective implementation requirements.

Versatility

  • With ROTOMAX, AquaStar represents a benchmark for the industry in the high performance recycling sector.
  • With a folding partition, the vehicle can vacuum up and dispose of two different media.
  • A dry vacuum device permits the pick-up of dry material while streets can be cleaned with high-pressure water from wash booms.
  • The ADR equipment is used for the disposal of dangerous waste materials.

Outstanding economy

The consumption-optimised hydraulic system reduces fuel consumption by adapting the suction power in accordance with the vacuum rate. In the recycling mode, the water flow rate is also automatically adapted to the available water supply. Cleaning quality is enhanced by the constant jetting hose drive with speed control. Additional interfaces make it possible to link up with recording and information systems for the planning and organisation of sewer maintenance.

Greater operating comfort

The information display with integrated analysis system gives the operator qualified feedback on current performance parameters. Data such as jetting hose metre counter, vehicle weight and component status are transmitted directly to the radio remote control and presented in graphical form on the display. The display and control of the water pressure at the jetting nozzle also make sewer cleaning considerably easier.